Brick Repair in Jurupa Valley CA - Tight Joints and Brick That Stays Whole
Crumbling mortar, cracks along the joints or a white bloom that won't quit? We find the cause and fix your brick so it holds.
Worn joints repointed
We clear out tired mortar and pack the joints fresh.
Mortar suited to yours
New mortar fits your old brick so the face stays whole.
Broken brick replaced
Cracked or flaking bricks come out and close matches go in.
Water source tracked down
We find where moisture gets in before we patch anything.
Does my brick need repair, or just new mortar?
Brick repair in Jurupa Valley usually means repointing, where we clear the worn mortar out of the joints and fill them with fresh mortar, plus swapping out any bricks that have cracked or flaked, so water stays out and your wall stays sound.
Here's what surprises most folks. The mortar is supposed to wear out long before the brick does, because joints typically last more than 25 years while the bricks themselves can go well past 100. So on an older house, the fix is usually renewing the joints and leaving good brick right where it is.
The price moves with how much wall needs work, how deep the joints have worn, how many bricks have to come out and how hard the spot is to reach, since a chimney takes more setup than a low garden wall. The schedule mostly turns on the size of the job and whether a permit is involved. I'll send a written estimate that spells out the work.
- Joints that shed water again
- New mortar that suits your old brick
- Damaged bricks swapped for close matches
- A straight answer on what can wait
How do you know your brick needs repair?
It's worth a closer look once the joints start changing, because mortar that's letting go lets water into the wall behind it.
Mortar sinking back
The joints have worn back from the brick face, leaving a little ledge where rain sits instead of running off.
Mortar that crumbles
Drag a key along a joint and it turns to sand, or bits of mortar pile up along the base of the wall.
Holes in the joints
You can see gaps or missing chunks of mortar, sometimes deep enough to poke a finger into.
Hairline cracks
Thin cracks run through the mortar, or a crack opens right where the brick meets the joint around it.
Flaking brick faces
The front of a brick peels or pops off in chips, often next to a hard patch someone added years back.
White bloom that returns
A powdery white film keeps showing up on the brick even after you've scrubbed it off more than once.
Get a brick repair estimate
Send a few lines and photos of the worn joints. We'll reply within one business day to set a free on-site visit, with no obligation.
What I look at on a brick repair visit
Before I recommend anything, I want to know how your wall is put together, what the old mortar is like and where any water is coming from.
How the wall is built
I check whether it's solid brick or brick over a framed wall, because that changes how urgent a crack really is.
The old mortar
I look at how hard the original mortar is and what color it is, since the new mortar has to suit it, not overpower it.
Where water gets in
I look at gutters, sills, open joints and damp spots that could be feeding water into the brick.
The bricks themselves
I note any cracked, loose or flaking bricks that need replacing, and whether we can find a close match for color and size.
What a brick repair job looks like
We plan the work around your house and your schedule, and you'll know what we're doing and why before anyone picks up a chisel.
You call us
I ask a few questions about the wall and what you're seeing, then we set a time for me to come out.
I walk the wall
We walk it together while I take measurements and photos, and you can ask me anything right there.
Written estimate
You get a written estimate that spells out the work, so you know what you're paying for and why.
The work
Once you say go, we handle any permit steps, and our crew does the work with a lead mason running things.
Final walk-through
When the crew's done, I walk the finished wall with you again so you can see every joint we touched.
Why Jurupa Valley homeowners call us for brick repair
I'm the one who looks at your wall at the start and walks it with you at the end, and you'll understand what you're paying for before any mortar gets mixed.
The owner writes your estimate
I come out myself to look at the wall and write the estimate, so the person pricing it knows brick work.
Brick and block since 2013
We've been in business since 2013, and careful brick and block work is what most folks call us for.
Licensed and fully insured
We're licensed and fully insured, and I'm happy to show you the paperwork when I come out for the estimate.
Satisfaction guaranteed
Satisfaction guaranteed on every job. Call (951) 416-3127 or use the form when you're ready for me to look at your wall.
Brick repair in Jurupa Valley and the cities around it
In Jurupa Valley, permits come from the city's Building & Safety Department, which issues them for new structures, remodels and demolition and handles plan review and inspections. Its list doesn't name brick repair, so that office is the place to ask about your job. When a job needs a permit, we handle the paperwork and line up the inspections.
We're based in Jurupa Valley and work in the cities around it on both sides of the county line, including Eastvale and Riverside. Most brick calls we get are older brick homes with tired joints, cracked garden walls and worn chimneys, and folks often ask about retaining wall construction or driveway pavers while I'm there.
Got brick joints that are starting to let go?
(951) 416-3127Brick repair questions we hear
How do I know if my brick needs repointing?
Your brick likely needs repointing if the mortar has worn back more than 1/4 inch from the face, crumbles, has holes in it, or shows hairline cracks in the joint or between brick and mortar. Walk along the wall and look closely at the joints, and snap photos of anything you find so I can see it before I come out.
Why should new mortar match the strength of the old mortar?
New mortar should be no stronger than the original, because a harder mortar can make the brick face spall, or flake off. The joint is meant to give a little so the brick doesn't have to, so I check the old mortar before we mix anything.
Do small cracks in brick mortar need to be fixed right away?
Not always, because cavity and veneer walls, where the brick stands a little off the wall behind it, can handle some extra moisture. Cracks cause more water trouble in solid brick walls, so the way your wall is built helps decide how soon to act.
Who can do brick repair work in California?
In California, brick and masonry work falls under the state's masonry contractor license, which covers brick and fire brick, masonry walls and fences, and the cleaning and waterproofing that go with them. An unlicensed person can only take jobs under $1,000 when the work needs no permit and they have no employees, so anything that needs a permit takes a licensed contractor.
How much does brick repair cost in Jurupa Valley?
There's no single price for brick repair, because it comes down to your wall, and I won't guess before I've seen it. After I walk it, you get a written estimate that breaks out each part of the work, so you can see where the money goes.
What causes white powder on brick that keeps coming back?
A white powdery bloom, called efflorescence, is normal on new brick as the wall dries, but if it keeps returning, water is likely getting into the wall and staying there. Scrubbing won't fix that, so we track down where the water's getting in before we patch anything.
Have us take a look at your brick
One visit tells you whether your joints need work now or can wait a while, and the on-site quote is free.