Fireplace installation in Jurupa Valley CA - an insert that fits and vents right
An old firebox you never light? We fit a vented insert made for your fireplace and finish the masonry around it.
An insert that fits
We match the insert to the fireplace you already have.
Vented the right way
We plan around a vented unit that suits your house.
Gas line and power
A new gas line and outlet, ready before the final hookup.
Finished masonry surround
We finish the brick or stone around it to suit the room.
Should you fit an insert or put in a new fireplace?
Fireplace installation in Jurupa Valley means fitting an insert into the fireplace you already have, or adding a new masonry or factory-built unit, so you end up with a vented fire you'll actually want to sit by.
I start with what you've got now, an old masonry firebox or a factory-built metal unit, because that decides which inserts will fit. With no fireplace at all, it's a new masonry fireplace or a lighter prefab unit. I'll also be honest that a fireplace is more about comfort and looks than heating the house, because most are poor heaters.
The price moves with whether you're adding an insert or building new, gas or wood, how far the gas line has to run and how much brick or stone veneer goes around it. The schedule turns on the unit you pick and the city's review and inspections. The written estimate I send spells out the work for your house.
- The right insert for your firebox
- A vented unit planned from day one
- Brick or stone finished to the room
- A written estimate that spells it out
When is it time to add a fireplace or an insert?
If your fireplace sits unused or a room you spend your evenings in is missing one, it's worth a look before the cool nights come around.
A fireplace you never light
Your old masonry fireplace sits dark because it's smoky, drafty or just more trouble than it's worth to get going.
Tired of hauling wood
You'd rather turn a knob than split and carry wood, so a gas insert in the existing firebox starts to make sense.
A worn factory-built unit
The metal box in your factory-built fireplace looks tired, and you want to know which inserts are made to go in it.
A room with no fireplace
Your family room or great room has a blank wall where you'd love a fire to gather around in the evening.
Cracked brick around the opening
The brick face or hearth around the firebox is cracked or loose, and you'd like it redone along with the new unit.
A remodel already underway
You're opening up the room anyway, which makes it a good time to plan the venting, gas and power before walls close.
Ask for a fireplace estimate
Tell us your fireplace type, gas or wood, and where your gas comes in. We reply within one business day, and the on-site estimate is free, no obligation.
What I look at before a fireplace install
Before I suggest anything, I look at the fireplace you have, the chimney above it, where your gas comes in and the brick around the opening.
The fireplace you have
I note whether it's a masonry firebox or a factory-built unit and write down the make, since the insert gets matched to it.
Chimney and venting path
Most gas inserts vent up the existing chimney through new flexible pipe rather than the old flue, so I check the path it'll take.
Where your gas comes in
I find your gas source, because how far it sits from the fireplace sets how long the new line has to run.
The brick around it
I check the face, hearth and mantel area so the finish around the new unit looks like it was always part of the room.
How a fireplace installation job runs
We plan a fireplace job around your house and your schedule, so you know what's going in, who's doing it and what comes next before any work starts.
You call us
You call, I ask about the fireplace you have and what you're after, and we set a time for me to come look.
I walk the job
I walk it with you, take measurements and photos, and look over the firebox, chimney, gas source and brick.
Written estimate
I send a written estimate that spells out the unit, the venting, the gas and power and the masonry around it.
Permit and install
You say go, we handle the permit, and the city reviews the plans before work begins. Then our crew and lead mason set the unit.
Inspection and walk-through
The city inspects the work, and the gas line gets a pressure test before sign-off. Then I walk the finished fireplace with you.
Why Jurupa Valley homeowners call us for a fireplace
You'll know what you're paying for and why, and on something that sits inside your living room, we'd rather take the careful road than the quick one.
The owner writes your estimate
I come out myself to look at your fireplace and write the estimate, so the person pricing it knows the work.
Brick and block since 2013
We've been at this since 2013, and 13 years in, I still want people to feel good calling us again.
Covered on every job
We're licensed and fully insured, which matters when a job means a gas line, power and a vent through your house.
Satisfaction guaranteed
Satisfaction guaranteed on every job. Call (951) 416-3127 or use the form, and I'll set a time to come look.
Fireplace installation in Jurupa Valley and nearby
In Jurupa Valley, permits come from the city's Building and Safety Department, which covers new building and remodels and enforces the electrical, mechanical and plumbing codes. Whether your fireplace job needs a permit is the department's call. When it does, we handle the paperwork and line up the inspections, and I'm glad to point you to the department yourself.
We're based in Jurupa Valley and work in the cities around it on both sides of the county line, including Eastvale and Riverside. A lot of the fireplaces we see are older brick ones that rarely get lit, in the same neighborhoods where we build concrete block walls and patios.
Have a fireplace you'd like to finally use again?
(951) 416-3127Fireplace installation questions
Can I put a fireplace insert in my existing fireplace?
Usually yes, because an insert is made to sit inside the firebox of an existing masonry or metal fireplace. If yours is factory-built, sometimes called zero-clearance, the insert has to be one designed and tested for that exact unit, which narrows your choices. That's why I write down the make on the first visit.
Can you install a gas fireplace without a vent?
It's not something we recommend, so we plan around a vented unit instead. Unvented models raise indoor air quality concerns, and some places make installing them illegal. A vented gas unit can run up an existing chimney or straight out through the roof or the wall behind it.
How long does a gas fireplace insert installation take?
One manufacturer's walkthrough puts a gas insert job at three to ten days, and it's not a do-it-yourself project. That stretch includes inspections before the final hookup, so plan on a professional crew and several workdays rather than an afternoon.
How much does it cost to install a fireplace in Jurupa Valley?
Across the US, installing a fireplace usually costs about $2,000 to $10,000 per job, and that's the national range for the whole job, not our price. When you compare quotes, ask whether each one includes the venting and the site work, so you're comparing the full job. My written estimate lists each piece for your house.
What is included in a gas fireplace insert installation?
A gas insert job usually covers cleaning the firebox and flue, running power to an outlet inside the fireplace, running the gas line, dropping and capping the vent liner, and setting and leveling the insert. On our jobs, the brick or stone around it gets finished too, so the new unit looks right in the room.
Should I choose a gas or wood-burning fireplace in Jurupa Valley?
Either can work, and it comes down to how you'll use it and what your house already has. Gas needs a gas line and a vent, while wood skips the gas line. If you're leaning toward wood, the South Coast air district has proposed changes to its wood-burning rule, with a public hearing notice dated September 5, 2025, so it's worth checking where that stands.
Get your Jurupa Valley fireplace estimate
If you can find the make and model on your fireplace, mention it when you call so I can check which inserts fit.