Masonry Restoration in Jurupa Valley CA - Sound joints and brick that keeps its face
Mortar crumbling out of your brick joints, or cracks running along the bricks? We repoint and clean the wall gently so it's sound again.
Worn joints raked out
We clear crumbling mortar back to where it's still solid.
Fresh mortar packed in
New joints filled firm and shaped to match the old ones.
Gentle cleaning
No blasting, so your brick keeps its hard outer face.
Wall made tight
Joints get sealed up before any water cleaning starts.
What does masonry restoration involve on an older brick wall?
Masonry restoration in Jurupa Valley is mostly repointing, where we rake out the worn mortar between your bricks and pack the joints with fresh mortar, then clean the face gently so the wall sheds water and looks cared for again.
You might have heard it called tuckpointing. The price comes down to how many joints have gone soft, how deep they've worn, how tall and easy to reach the wall is, and how much cleaning it needs. The schedule turns on mild weather for fresh mortar to cure and on any permit the city wants, and my written estimate spells out the work.
We clean old brick gently and stay away from blasting, because it can strip the hard face right off and leave the brick soaking up water. If I spot other worn spots on the same visit, like a loose cap or a chipped brick, I'll note them so you see the whole picture.
- Sound joints that shed water
- Brick face left intact
- A wall that looks cared for again
- A written estimate that spells it out
How do you know your brick needs restoration?
If mortar comes away when you scrape a joint with a key, or you can see gaps between bricks, it's time to have someone look.
Mortar crumbling out
Run a finger along a joint and sand comes away. That mortar has quit holding and lets water in behind it.
Holes in the joints
Spots where the mortar is missing altogether leave open pockets that hold water right against the brick.
Hairline cracks in mortar
Thin cracks running through the joints are often the first sign the mortar is wearing out.
Cracks along brick edges
A crack between the brick and the mortar means the two have pulled apart, and water follows that line inside.
Joints sunk back from brick
When the mortar sits well behind the face of the brick, weather has worn it down and the joint needs filling.
White stains or damp spots
White powder on the brick or damp patches inside usually mean water is getting through the wall somewhere.
Ask for your restoration estimate
Send photos of the cracked or crumbling joints and where the wall is. I'll reply within one business day, and the on-site estimate is free, no obligation.
What I look at on a restoration visit
Before I recommend anything, I walk the whole wall with you, because the worn spots and the old mortar tell me what the job really needs.
Where joints are failing
I mark the crumbling, cracked and hollow joints and how deep they've worn, so the estimate names the joints that need work.
The old mortar
New mortar should be about as strong as the old or weaker, because a harder mix can damage brick past fixing. Ask any crew how their mix compares.
The brick face
I look for flaking, chipped or loose brick and any old blasting damage, since a worn face changes how gently we clean.
Getting to the wall
Wall height, plants, fences and tight side yards change how we set up, and that shows up in the price.
How a masonry restoration job goes
We plan the work around your house and the weather, because fresh mortar cures best on mild days, and you'll see the whole plan in writing before the crew shows up.
You call us
You call (951) 416-3127 or send the form, I ask a few questions about the wall, and we set a time to look.
I walk the wall
I walk the job with you, take measurements and photos, and show you which joints I'd fix and why.
Written estimate
You get a written estimate that spells out the work. Once you say go, we handle any permit steps and line up inspections.
The crew works
Our crew fixes the joints with a lead mason running things, and the wall gets tight before any water cleaning so we're not pushing water into your house.
Final walk-through
I walk the finished wall with you again, and we clean up so the yard looks the way we found it.
Why Jurupa Valley homeowners call us for brick restoration
I want you to understand what you're paying for and why. Good masonry should outlast the folks who build it, so with old brick I'd rather take the careful road than the quick one.
The owner walks your wall
I come out myself, look over the brick and write the estimate, so the person pricing your job has actually seen it.
Doing masonry since 2013
We've been at it 13 years, and fixing worn joints on older brick homes is a big part of what we do.
Licensed and fully insured
California's licensing board counts brick, block and stone work, plus the cleaning and caulking that go with it, as masonry work.
Satisfaction guaranteed on every job
That holds for restoration and for new work like fireplace installation or stone veneer installation. Call (951) 416-3127 to set up a visit.
Masonry restoration in Jurupa Valley and nearby
Jurupa Valley says construction typically involves a building permit, and it asks you to check early with its Building and Safety office about what your job needs. When a job needs one, we handle the paperwork and line up the inspections, and if you'd like to check on your own project, I'm glad to point you there.
Riverside County rates earthquake risk very high across its western part because of the San Andreas and San Jacinto faults, and the state says shaking causes nearly all quake damage to California homes. We're based in Jurupa Valley and work in the cities around it on both sides of the county line, like Eastvale and Riverside, where we see plenty of older brick homes and block walls.
Want someone to take a look at your worn mortar joints?
(951) 416-3127Masonry restoration questions we hear
How do I know if my brick needs repointing?
Your brick needs repointing when the joints show crumbling mortar, holes, hairline cracks, cracks between the brick and mortar, or mortar worn back more than 1/4 inch. Walk your walls, note where you see these, and point them out to me at the estimate.
How long does mortar last on a brick house?
Mortar joints usually last more than 25 years, while the brick itself can go well past 100. So over a brick wall's life, repointing now and then is normal upkeep and not a sign something's gone badly wrong.
Is sandblasting safe for old brick?
Usually not. Historic preservation guidance says grit blasting, grinders and sanding discs take off dirt or paint and usually some of the brick's surface too, which is why we clean gently instead. If you want the original face kept, ask any crew which cleaning method they plan to use.
Do I need a permit for masonry restoration in Jurupa Valley?
Plan on checking, because the city says construction typically involves a building permit, as I mentioned above. If your job needs one, we take care of the paperwork and the inspections.
How much does masonry restoration cost in Jurupa Valley?
You'll get your own figure in a written estimate after I walk the wall, because every wall wears differently. Repointing a few soft spots costs far less than redoing a whole side, and heavy cleaning or a tall wall that needs scaffolding adds to it.
What is the best time of year to repoint brick?
Spring and fall usually work best. One national cost guide suggests those seasons and calls daytime temperatures between 40 and 90 degrees for at least 24 to 72 hours ideal for mortar to cure, which matters with our hot inland summers.
Get your brick looked at this week
We pick up seven days a week, early mornings into the evening, so call or send the form with a few photos of your joints.